Resources for

UEENEEG128A - Plan layouts for electrical switchboards and control panels

UEENEEG158A - Conduct electrical tests on HV electrical machines.

www.electricaldiploma2013.zoomshare.com/files/g128158.htm

UEENEEG128A - Plan layouts for electrical switchboards and control panels

1.1) Descriptor

This unit covers selecting and arranging equipment in electrical switchboards and control panels operating at voltages up to 1,000V a.c. or 1,500 V d.c. and fault levels not exceeding 20 kA. The unit encompasses arrangements for protection of persons and property, correct functioning, compatibility with the supply, and intended arrangement of circuits and selection of switchgear, controlgear and protection devices based on calculated and deemed-to-comply solutions and planning documentation.

	Practical	Theory
KS01-EG128A Switchboard/control panel planning Evidence shall show an understanding of planning switchboard and control panel layouts to an extent indicated by the following aspects
T1 Electrical metering arrangements encompassing:  Purpose, types and applications.  Metering equipment.  Arrangements for metering	Switch board wiring theory notes & practice in G033+G103+G104 units practicals can be performed together with UEE30811 course The students who complete G033+G103+G104 can be given exemption for practicals	Navy-Click HERE Other-Click HERE
: T2 Switchgear/controlgear encompassing:  Types and applications  Operating principles  Interlocking systems  Control and protection  Installation requirements	Overcurrent relay connection practical in K2.11 & CT / PT Connection practice in K2.11	Navy-Click HERE Other-Click HERE
T3 Control panel wiring encompassing:  Equipment layout methods and accessories  Connection identification methods  Wiring techniques	Switch board wiring theory notes & practice in G033+G103+G104 units practicals can be performed together with UEE30811 course. The students who complete G033+G103+G104 can be given exemption for practicals	Navy-Click HERE Other-Click HERE

For Navy Students

UEPOPS428B - Develop H.V. switching programs

Session 1+2 Ship Electrical System

Chapter 1 Marine Electrical Technology.pdf (23.48MB)
http://www.filefactory.com/file/537mi0phjje7/n/Chapter_1_Marine_Electrical_Technology.pdf

Chapter 3+4 Marine Electrical Technology.pdf (18.79MB)
http://www.filefactory.com/file/79pqrykz3hhb/n/Chapter_3+4_Marine_Electrical_Technology.pdf

Session 3+4 Fault Protection

Session 3+4 Fault Protection.pdf (13.07MB)
http://www.filefactory.com/file/3n72rugkkgc5/n/Session_3+4_Fault_Protection.pdf

Session 5 Voltage Regulators

428B Session 5.pdf (39.59MB)
http://www.filefactory.com/file/7cgmc2htcq4h/n/428B_Session_5.pdf

Session 6 Alternators Parallel Operation

428B Session 6.pdf (16.87MB)
http://www.filefactory.com/file/ppdy0087ci9/n/428B_Session_6.pdf

Session 7+8 Deck Machineries

428B Session 7.pdf (46.31MB)
http://www.filefactory.com/file/4qvl3csc3q23/n/428B_Session_7.pdf

428B Session 8.pdf (11.3MB)
http://www.filefactory.com/file/ab255uu0uif/n/428B_Session_8.pdf

Session 9 Air Compressors

428B Session 9.pdf (3.83MB)
http://www.filefactory.com/file/2kop1yjf2a5j/n/428B_Session_9.pdf

Session 10 Risk Assessment

Session 10.zip (32.93MB)
http://www.filefactory.com/file/5qx9rysk3p79/n/Session_10.zip

Session 11+12 Alarm & Communication

428B Session 11Communication .pdf (3.84MB)
http://www.filefactory.com/file/1yu9w3xtm193/n/428B_Session_11Communication_.pdf

428B Session 11Alarm.pdf (5.9MB)
http://www.filefactory.com/file/2g3ola1dv1ef/n/428B_Session_11Alarm.pdf

Session 13+14 Maintenance Troubleshooting

428B Session 13+14.pdf (20.27MB)
http://www.filefactory.com/file/39xqbx0acxrt/n/428B_Session_13+14.pdf

Session 15+16 Generator Control

For Other Students

Notes

Power Panel Construction

Power System Protection

Power System Operation

Videos

G015(AE)Lesson 1-Power system protection scheme.zip

http://youtu.be/ihpd3cDAhBU

http://youtu.be/EGXkLRM2L9M

http://youtu.be/zOIUYQ7OJfs

http://www.filefactory.com/file/c0ba70c/n/G015_AE_Lesson_1-Power_system_protection_scheme.zip

G015(AE)Lesson 2-Differential relay.zip

http://youtu.be/2iW0oEScMsw

http://www.filefactory.com/file/c0ba752/n/G015_AE_Lesson_2-Differential_relay.zip

G015(AE)Lesson_3-Over_current_&_earth_fault_protection.zip

http://youtu.be/hvGjdO9jEhk

http://www.filefactory.com/file/c0ba8ac/n/G015(AE)Lesson_3-Over_current_&_earth_fault_protection.zip

G015(AE)Lesson 4-Three phase differential relay.zip

http://youtu.be/2iW0oEScMsw

http://youtu.be/VuzjXkRx4UI

http://youtu.be/2iW0oEScMsw

http://www.filefactory.com/file/c0ba819/n/G015_AE_Lesson_4-Three_phase_differential_relay.zip

G015(AE)Lesson 5-Current time grading.zip

http://youtu.be/r0qkLrmkKsM

G015AE Lesson 6

http://youtu.be/InsTLh7_N5k

http://www.filefactory.com/file/c0ba875/n/G015_AE_Lesson_5-Current_time_grading.zip

G015(AE)Lesson_7-CT_PT.zip

http://youtu.be/ZF_y65xsM_M

http://www.filefactory.com/file/c0ba908/n/G015(AE)Lesson_7-CT_PT.zip

G015(AE)Lesson 8-Distance relay.zip

http://youtu.be/NKzMVquFLu8

http://www.filefactory.com/file/c386a2e/n/G015_AE_Lesson_8-Distance_relay.zip

G015(AE)Lesson 9-Telecom in power protection.zip

http://youtu.be/9C6ogqZAKRg

http://youtu.be/XRpffA6hU_U

http://youtu.be/X-kz3cyL9fU

http://www.filefactory.com/file/c0bbacb/n/G015_AE_Lesson_9-Telecom_in_power_protection.zip

G015(AG)Lesson 1-Stability.zip

http://youtu.be/fUyNqcXtBXg

http://www.filefactory.com/file/c0bba38/n/G015_AG_Lesson_1-Stability.zip

G015(AG)Lesson 2-Generator load sharing.zip

http://youtu.be/A-t7XH4rK4M

http://youtu.be/OTsis_KIRuk

http://youtu.be/8j1nD9nY2hU

http://www.filefactory.com/file/c0bbbc8/n/G015_AG_Lesson_2-Generator_load_sharing.zip

G015(AG)Lesson 3-Power Flow.zip

http://youtu.be/0OzT4Pol-Jc

http://youtu.be/fK0wcaTY_rw

http://www.filefactory.com/file/c386bf4/n/G015_AG_Lesson_3-Power_Flow.zip

G015(AG)Lesson 4-IP based system.zip

http://youtu.be/ve5O8K9fL7k

http://www.filefactory.com/file/c386b23/n/G015(AG)Lesson_4-IP_based_system.zip

UEENEEG158A - Conduct electrical tests on HV electrical machines.

This unit covers electrical safety and functional testing of electrical machines designed to operate at high voltage. The unit encompasses working safely, setting up and conducting continuity, insulation and short circuit and inspection and testing of iron circuit, interpreting and documenting test results and any resulting corrective actions.

WORK PERFORMANCE

Competencies

Delivery strategies

1 Prepare to conduct electrical tests on three phase induction machines

1.5 Winding data is obtained from winding data records or directly from measurements of stator and recorded in accordance with established procedures.

1.6 Winding is stripped from stator in accordance with established procedures

Motor winding data collection. Refer the following resources.

Motor.pdf (15.18MB)
http://www.filefactory.com/file/1qoo3eop20a3/n/Motor.pdf

Motor repair.pdf (8.73MB)
http://www.filefactory.com/file/4pkccv4s2ot5/n/Motor_repair.pdf

ElectricMotorRepair_Illustrations_StudyQuestions.pdf (6.65MB)
http://www.filefactory.com/file/7hvp1o9tkd87/n/ElectricMotorRepair_Illustrations_StudyQuestions.pdf

2 Conduct electrical tests on three phase induction machines

2.3 All necessary HV electrical tests are conducted to established cause of faults or operational condition of the machine.

2.4 Status of the machine is determined from test results and recorded.

2.5 Prescribed solutions are used to resolve work completion issues.

2.6 Routine quality checks are conducted to ensure coils are correctly wound with correct wire, number of turns and shape

Motor polarity test

Load test

Frequency speed test

The practicals can be performed by using motor testing sets.

The students who completed UEENEEG109A can be given exemption for practical component

3 Complete work report.

3.2 The status of the machine is documented in accordance with established procedures and appropriate person(s) notified.

Laboratory report presentation.

Quality asesment.pdf (0.19MB)
http://www.filefactory.com/file/4x0kg6win513/n/Quality_asesment.pdf

ESSENTIAL KNOWLEDGE & SKILLS

ADVANCED THEORIES FOR HIGH VOLTAGE TESTING OF ELECTRICAL MACHINES.

The relevant notes from the following textbooks can be used in delivery

Required aspects	References & Resources
KS01-EG158A High voltage motor testing devices and techniques Evidence shall show an understanding of HV motor testing devices and techniques to an extent indicated by the following aspects:	Main Textbook- High Voltage Engineering high_voltage_engineering.pdf (7.67MB) http://www.filefactory.com/file/44tvs1lhtpcp/n/high_voltage_engineering.pdf HV_MOTORS_EN.pdf (4.39MB) http://www.filefactory.com/file/6wqvfq7em7xr/n/HV_MOTORS_EN.pdf
T1 Test/measuring devices and their application	Megger-insulationtester.pdf (1.16MB) http://www.filefactory.com/file/7f17ebs7y7pf/n/Megger-insulationtester.pdf HV Testing.pdf (2.43MB) http://www.filefactory.com/file/9xdxvo2puqz/n/HV_Testing.pdf HV Machine testing.docx (0.16MB) http://www.filefactory.com/file/m5mcj5h2x5j/n/HV_Machine_testing.docx standards.pdf (0.77MB) http://www.filefactory.com/file/7l3bb32t1k67/n/standards.pdf
T2 Connection of test/measuring devices into a circuit encompassing:  safety procedures  circuit arrangement of test/measuring devices	hv testing of motors.pdf (2.21MB) http://www.filefactory.com/file/2s54fci0bfrj/n/hv_testing_of_motors.pdf stator insulation testing.pdf (0.24MB) http://www.filefactory.com/file/4icpd1pcu4ql/n/stator_insulation_testing.pdf shaft voltage discharge test.pdf (1.95MB) http://www.filefactory.com/file/4yhc73f7fu2z/n/shaft_voltage_discharge_test.pdf HV Machine testing.doc (0.44MB) http://www.filefactory.com/file/5rbu1whbobon/n/HV_Machine_testing.doc performance test.pdf (2.21MB) http://www.filefactory.com/file/6dikxtaoozuj/n/performance_test.pdf Med HV Motor test.pdf (0.18MB) http://www.filefactory.com/file/7fk7hqczrxvb/n/Med_HV_Motor_test.pdf
T3 Taking and interpreting readings	Motor monitoring.pdf (0.87MB) http://www.filefactory.com/file/352relpvbnbn/n/Motor_monitoring.pdf Engineering_Maintenance_a_modern_approach.pdf (3.21MB) http://www.filefactory.com/file/37pa7nt0e28d/n/Engineering_Maintenance_a_modern_approach.pdf Condition%20Assessment_HT%20Machine.pdf (0.86MB) http://www.filefactory.com/file/4h6n0za7lu53/n/Condition%20Assessment_HT%20Machine.pdf Electrical Insulation for rotating machines.pdf (10.6MB) http://www.filefactory.com/file/4vimgse9jxh/n/Electrical_Insulation_for_rotating_machines.pdf
T4 Storage, maintenance and care of test/measuring devices	R0301149.pdf (1.05MB) http://www.filefactory.com/file/1pm9vgfgt34z/n/R0301149.pdf Surge tester.doc (0.05MB) http://www.filefactory.com/file/2nhivig3459/n/Surge_tester.doc